guy anchor, guy wire and guy guard

Guy anchors are an important safety feature for challenge courses and zip lines. They are used to secure the cables that support the courses and lines, and they must be strong enough to withstand the weight of people and equipment.

There are a number of different types of guy anchors available, each with its own advantages and disadvantages. Some of the most common types of guy anchors used in the challenge course and zip line industry include:

  • Deadman anchors: Deadman anchors are buried in the ground and are held in place by the weight of the earth. They are a good choice for permanent installations, but they can be difficult to install and remove.
  • H-anchors: H-anchors are installed in the ground and have an "H"-shaped cross section. They are a good choice for temporary installations, and they are easier to install and remove than deadman anchors.
  • Eyebolt anchors: Eyebolt anchors are installed in the ground and have an eyebolt at the top. They are a good choice for applications where the guy wire is attached to a structure, such as a tree or a building.
  • No-Dig Screw-In Anchors:No-dig screw-in anchors are a type of guy anchor that does not require any digging. They are installed by screwing them into the ground, and they are a good choice for temporary installations. No-dig screw-in anchors are typically made of steel and come in a variety of sizes.

When choosing a guy anchor for a challenge course or zip line, it is important to consider the following factors:

  • The weight of the people and equipment that will be using the course or line.
  • The type of ground where the anchor will be installed.
  • The permanence of the installation.
  • It is also important to make sure that the guy anchor is installed and inspected properly to ensure its safety.

Major Manufacturers of Guy Anchors for Challenge Courses and Zip Lines

There are a number of major manufacturers of guy anchors for the challenge course and zip line industry. Some of the most well-known manufacturers include:

  • Hubbell: Hubbell is a leading manufacturer of electrical and telecommunications equipment. They also manufacture a line of guy anchors that are designed for use in the challenge course and zip line industry.
  • Chance: Chance is a leading manufacturer of playground equipment. They also manufacture a line of guy anchors that are designed for use in the challenge course and zip line industry.
  • Joslyn: Joslyn is a leading manufacturer of rigging and hardware. They also manufacture a line of guy anchors that are designed for use in the challenge course and zip line industry.

Safety

Guy anchors are an important safety feature for challenge courses and zip lines. It is important to make sure that guy anchors are installed and inspected properly to ensure the safety of people and property.

 

Proof Testing Anchors

Proof testing is a process of testing an anchor to make sure it can withstand the load it is designed to support. Proof testing is typically done by applying a load to the anchor that is greater than the load it is designed to support. If the anchor fails during proof testing, it should be replaced.

Installing Anchors to Association for Challenge Course Technology and/or Professional Ropes Course Association Standards

The Association for Challenge Course Technology (ACCT) and the Professional Ropes Course Association (PRCA) have developed standards for the installation of guy anchors. These standards are designed to ensure that guy anchors are installed safely and that they can withstand the loads they are designed to support.

When installing guy anchors, it is important to follow the ACCT and PRCA standards. These standards can be found on the ACCT and PRCA websites.

 

Conclusion

Guy anchors are an important safety feature for challenge courses and zip lines. It is important to make sure that guy anchors are installed and inspected properly to ensure the safety of people and property.