Search results for: 'rope coil'

Robertson and Adventure Gear introduces the Total Transfer PT harness system, a combined transfer and therapy harness system that offers patients a new way to sit, stand, and walk without complex therapy harness transfer setups. Learn More

Nail Chipper Tri-Cut Auger Bits, Typically when drilling a hole for a through bolt as used in ropes course or zip line construction, you will need to drill a hole 1/16" bigger than the bolt you are using. 5/8" bolt requires a 11/16" hole. These are all 18" long bits. 7-1/2" are available by request. Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More

The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More

Pulley carabiner, available in versions with or without TRIACT-LOCK locking system. Learn More

Petzl ZigZag Prusik The linked rings provide precision and fluidity when moving around. The pulley is mounted on ball bearings to allow the slack to be taken up easily. Learn More

The Redirection Pulley is the first pulley of its kind for the zip line industry; lightweight, corrosion-resistant and specially engineered to be virtually resistant to snagging. Learn More

The CMI Velocity Micro Zipline trolley is a fast zip line trolley that is small and light weight. Stainless steel side plates assure long life and minimal wear. Learn More

This is a great low profile SRD with a parallel attachment to easily align cable and belay loading. Super strong with a triple axle design and a thick folded plate design. Learn More

Fist Grip Cable Clamp - Import Learn More

Crosby Fist Grip Cable Clamps Learn More

Knot-passing pulley allows passage of joining knots Large diameter sheave mounted on sealed ball bearings for excellent efficiency. Learn More

MICRO TRAXION is an ultra-compact, extremely light progress capture pulley that is exceptionally efficient. The cam can be locked in open position so the device can be used as a simple pulley. Learn More

Double progress capture pulley designed for use with the JAG double pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More

Shoulder Eye Screw Lag, Use for connecting hand lines, spiders webs to trees, etc. on challenge courses. Do not use in life support applications. Also used when wrapping cable around a tree. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Stainless Steel Cable clamps are ideal for use in salty and acidic environments like zip lining close to oceans or salt lake. These are durable and outlast Drop Forged clamps in harsh environments. Learn More

The smallest and strongest knot passing pulley on the market today! With an incredible MBS of 15,000 lbs and high strength stainless steel, our knot passing pulley puts the others to shame. Learn More

Kong Furtura Chest Acscender Learn More

Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More

Petzl Caterpillar Edge Protector, The Caterpillar Edge Protector can be positioned independently to adapt to whatever the terrain throws at you Learn More

Ready-to-use reversible rescue kit designed to easily pick off and lower a victim. Learn More

Yates Figure Eight Chest Harness, Great for use on zip line operations. Attachment points at waist and between shoulders. Safety attachment at rear of waist. Padded waist belt. Super easy to get on and adjust. Learn More

Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. Learn More

The Figure 8 by Omega Pacific remains a popular device for their simplicity, durability and dependability. Learn More

Our most versatile belay and abseil device made of solid stainless steel for durability. Learn More

The CORAX is the versatile harness par excellence: easy to use and comfortable, it is designed for rock climbing, mountaineering or via ferrata. Learn More

CMI Double Expedition Ascender, The cam is the same design as those in our now famous Ultrascenders and carries the same lifetime wear-out guarantee. Extra large handgrip opening easily accomodates gloved or mittened hands Learn More

Double pulley designed for use with the JAG TRAXION double progress capture pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency. Learn More

This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More

Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More

In a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in self-rescue situations. Learn More

They fit securely on a wide range of flange widths and beam sizes, with a built-in suspension bar that provides for close mounting. The clamp jaw design reduces flange stress by distributing the load away from the flange edge. Learn More

The AIRLINE throw-line offers an excellent compromise between flexibility and rigidity, for an accurate throw without the formation of knots as it comes out of the bag. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More