Back to Top
Cross Arm Braces
Used to support cross timbers for ropes course, challenge course, zip lines and industrial applications.
Cross Arm Braces
Used to support cross timbers for ropes course, challenge course, zip lines and industrial applications. Have rounded ends and are punched at one end with a 9/16" hole, with a 7/16" hole at the other end. Holes punched 1-inch from brace end to center of hole. Hot dip galvanized.
Flat crossarm braces, used in pairs, are an inexpensive means of aligning and supporting crossarms.
Mounting hole diameters are 7/16" for 3/8" crossarm mounting bolts and 9/16" for pole mounting with 1/2" lag screw or through bolt. Hole centers are 1" from the brace ends, which are rounded for extra safety.
Part No |
Product Name |
Height |
Length |
Width |
Wt (lb) |
|
CROSSARM28 |
1/4 X 1-1/4 X 28" CROSSARM BRACE |
1/4 in |
28 in |
1-1/4 in |
2.52 |
| Manufacturer | Hubbell |
|---|
Write Your Own Review
