Back to Top
RAPPEL RACKS
Rappel Racks are 'U' shaped frames, attached to the rappeller's harness, into which snap multiple bars that pivot from the other side of the frame. The rope is woven through as many of the bars as are required to provide sufficient friction. This allows for variations in rope diameter and condition, as well as controlled rate of descent. Rappel racks are the best solution for rappelling when you have large weights or lots of distractions while you are in the air. These can be woven through the bars from once to 10 times or more to help reduce or increase rope drag.
-
CMI Rescue Rack Rappelling Rack Descender$93.95We chose stainless steel over aluminum because of its "wearever" qualities. In order to compensate for the reduced friction inherent in stainless bars, we increased the radius of the friction surface to a full 1/2". Learn More -
Sport Rack - Rappelling Descender$100.00CMI Sport Racks are formed from 5/16" diameter stainless steel and are fitted with oversize stainless steel bars. We chose stainless steel over aluminum because of its "wearever" qualities. Learn More
-
Mini Rack Rappelling Descender$58.00The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More
-
Hyper Rack Rappelling Descender Rack$69.00Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Learn More
-
Hyper Rack Extreme Rappelling Descender$104.00The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More
